News

Explosion-proof flashlight use matters needing attention

Release time:

2023-09-07 11:14

Source:

Explosion-proof flashlight use matters needing attention:

In order to ensure the service life of the explosion-proof flashlight, it is necessary to use and maintain it correctly. Do not charge it for a long time or charge it frequently. Generally, it is required to charge it again after a good charge and use it for a period of time. The specific requirements shall be implemented according to the instruction manual of the explosion-proof flashlight.

Storage temperature:

Under normal circumstances, explosion-proof flashlight battery due to the internal liquid, in the case of low temperature long-term storage will destroy the internal chemical substances of the battery, so it is recommended that the conditions, the storage temperature should not be lower than -20 ℃; and too high temperature also makes the battery can not reach its rated capacity, the general storage temperature should not be higher than 40 ℃. The normal storage temperature of the rechargeable battery is -20 ℃ ~ 65 ℃. When the temperature drops below -20 ℃, the electrolyte in the battery will solidify, the internal resistance of the battery will become infinite, and the battery will not be used. When the temperature exceeds 65 ° C, the electrolyte will produce a large amount of gas by side reaction, and the resin adhesive in the electrode sheet will also deteriorate, resulting in the gradual aging and decline of the entire battery, and even failure in the short term.

explosion proof flashlight charging and discharging temperature:

Charging temperature, generally at 0 ℃ ~ 45 ℃. The discharge temperature is generally -20°C ~ 65°C; but in some special cases, low-temperature batteries and high-temperature batteries can be used.

Previous Page

On the technical advantages of LED explosion-proof lamps

Next Page

How to buy explosion-proof flashlight

Related News

The difference between LED explosion-proof floodlight and LED explosion-proof floodlight

LED explosion-proof floodlights and LED explosion-proof floodlights are shown in the irradiation range between the two. LED explosion-proof floodlights are also called projection lights, spotlights, spotlights, etc. They are mainly used for architectural decorative lighting and commercial space lighting. Their decorative components are heavy and long-distance lighting are used, and there are many types of styles in modeling design. LED explosion-proof floodlight is a point light source that can be evenly illuminated in all directions, and its illumination range can be adjusted arbitrarily, and standard floodlights can be used to illuminate the entire scene.

15 advantages of portable explosion-proof searchlight

The Group believes that in the information age of economic globalization, informatization will become the only way for SMEs to enhance their competitiveness, and e-commerce will become the key path for enterprises to achieve informatization. Therefore, the Group will continue to focus on promoting the e-commerce and informatization process of Chinese SMEs, continue to innovate, continue to introduce more and better services, build intelligent Chinese enterprises, and achieve smart entrepreneurs!

Running light-the story of the flashlight

Many years ago, flashlights were the only household appliances. During the day, put it on the table; at night, put it on the head of the bed; when walking at night, take it in your hand. That a beam of silver white light, accompanied us through a section of uneven dirt road.

On the technical advantages of LED explosion-proof lamps

LED explosion-proof lamps are widely used in many special equipment and construction, so what are the technical advantages of LED explosion-proof lamps.

Explosion-proof flashlight use matters needing attention

In order to ensure the service life of the explosion-proof flashlight, it is necessary to use and maintain it correctly. Do not charge it for a long time or charge it frequently. Generally, it is required to charge it again after a good charge and use it for a period of time. The specific requirements shall be implemented according to the instruction manual of the explosion-proof flashlight.

How to buy explosion-proof flashlight

Close-range lighting (within 1 meter, with reflection of surrounding objects) recommends multiple LED products, which are suitable for writing, repairing and eating at close range as camp lights and headlights. However, it is not recommended that the more lamp caps, the better. The working voltage of LED is about 3V. Therefore, many flashlights and headlights are driven by 3AAA batteries. 20 to 30 lamp caps are close to the current load limit, and it is easy to damage the battery, reduce the lighting time, the brightness increase is not obvious, I think more than 5 is enough, more than the LED will only increase the probability of failure.